General Pump EP1508S34 — 15 mm bare pump
General Pump EP Series bare pump with a bore of 15 mm and a right-hand shaft. Match the model on the installed pump before ordering a replacement.
Right-hand shaft. Confirm pump model before ordering.
Minimum 1; order in multiples of 1. Shipping and applicable tax are additional. Confirm availability with IHC.
Build a list for your purchase order. You can download or email it before ordering.
Specifications
- Bore
- 15 mm
- Rated speed
- 3,400 RPM
- Manufacturer rated flow
- 3.4 GPM
- Manufacturer maximum pressure
- 3,045 psi
- Inlet connection
- 1/2–14 BSP female
- Outlet connection
- 3/8–19 BSP female
- Shaft
- 24 mm; right-hand
- Crankcase oil capacity
- 15 oz
From the IHC source documents below. Match the model and connections to your equipment.
Selection & care
Pump rating and system setting
These are manufacturer bare-pump ratings. FanMist operates at a nominal 1,000 psi; the installed motor, drive and system design determine usable station output. The maximum pump rating is not an instruction to raise system pressure.
Model-specific service parts
The two EP models use different service kits. Send IHC the pump model and serial information when requesting valves, seals or packing kits.
Compare EP pump models
Manufacturer ratings for the bare pumps; confirm the installed station’s operating configuration.
Scroll the table to see all specifications.
| Part | Bore (mm) | Speed (RPM) | Rated flow (GPM) | Maximum pressure (psi) |
|---|---|---|---|---|
| EP1812S17 → | 18 | 1,750 | 4.0 | 2,900 |
| EP1508S34Viewing | 15 | 3,400 | 3.4 | 3,045 |
Related parts
Pump service supplies
Helpful guides
Technical references
Match the part number, dimensions and electrical rating to your equipment before ordering. Reference photos may represent size or voltage variants.