303 stainless steel nozzle — 10.58 lbs/hr, clear band
Ruby-orifice misting nozzle with a clear identification band and a rated water output of 10.58 lb/hr at 1,000 psi. An internal anti-drip valve and replaceable filter are built into the nozzle.
10/24 UNC thread. Ruby orifice insert; 5-micron filter included. Order in multiples of 10.
100+ units: $23.85 each
Minimum 10; order in multiples of 10. Shipping and applicable tax are additional. Confirm availability with IHC.
Build a list for your purchase order. You can download or email it before ordering.
Specifications
- Rated water output
- 10.58 lb/hr at 1,000 psi
- Flow
- 0.021 GPM at 1,000 psi
- Orifice diameter
- 0.300 mm
- Identification band
- Clear
- Connection
- 10/24 male UNC
- Body / orifice insert
- 303 stainless steel / ruby
- Included filter
- 5 micron
- Anti-drip cracking pressure
- 300 psi
From the IHC source documents below. Match the model and connections to your equipment.
Selection & care
Selecting the output
Choose output with the required humidity load, fan airflow and total number of nozzles in mind. A shared thread size does not make different nozzle outputs interchangeable in a designed system.
Installation and care
Install finger tight. Pliers or a wrench can over-compress the O-ring at the threaded end. If a nozzle drips after shutdown, the troubleshooting guide also calls for checking system depressurization and the drain path.
Connection details
Compare nozzle outputs
All outputs are rated at 1,000 psi with a 5-micron filter. Values follow the rounded figures in the nozzle data sheet.
Scroll the table to see all specifications.
Related parts
Replacement filter and seal
Helpful guides
Technical references
Match the part number, dimensions and electrical rating to your equipment before ordering. Reference photos may represent size or voltage variants.